Goodwoodbytopher / good wood by topher

Robots.txt Information

Robot	Path	Permission
GoogleBot	/	✔
BingBot	/	✔
BaiduSpider	/	✔
YandexBot	/	✔

Meta Tags

Title	good wood by topher
Description	A[edit] Applied carving - background which is worked separately and then applied, rather than being worked in place. Architrave - ornamental mouldings around a door or window frame, covering the joint between the frame and plaster. B[edit] Bead - a semicircular piece of moulding. Bench dog or Bench stop - a peg standing proud of the bench surface. Blind - joinery with mating surfaces not protruding through the face or end grain of the pieces being joined. Example - blind mortise and tenon joint Billet - 1. a short piece of log particularly used for fuel; 2. a split out piece of a bolt of wood. Bolster (pillow, cross head) - 1. shoulder; 2. a timber between a post and a beam to increase the bearing or shorten the span. Bolt - a piece of log cut to specific length, usually a short length from which products such as shingles are split or cut. Sometimes also called a billet or round. Brace - a hand tool used to drill holes, having a knobbed handle on the top to which pressure is applied, and a U-shaped grip in the middle which is used to rotate the drill bit. Burl - a knotty growth from a tree with a convoluted, complex grain. C[edit] Cannel, channel - the concavity of a gouge blade. Card scraper - a flat blade with a burred edge used for smoothing. Caul - A strip or block of wood used to distribute or direct clamping force Chatoyance - the effect seen in dramatic wood grain direction changes as seen in flame figured maple. Chip carving - incised surface decoration, usually geometric. Chops - a type of vise. Climb cut - On a table saw or router, cutting against the normal feed direction at the end of the cut to prevent tearout. Close grain - woods with very fine fibers of cells (wood grain) that are not visibly porous. Conversion - reduction of a whole log into pieces suitable for working. Conversion can be done in three basic ways, sawn, hewn, or split. Crook - longitudinal bending to one side, caused by uneven seasoning or grain. (See Wood warping) Crotch - the section of a tree where a branch divides from the trunk, or the trunk divides in two; typically an area of convoluted grain. Crossgrain - working perpendicular to the grain. Crosscut - a cut made perpendicular to the grain. Crown of thorns - a system of self-supporting and interlocking pieces. Cruck - a pair of crooked, structural timbers in a timber frame building. Crucks act as both posts and rafters like an A-frame. Cup - transverse bending, convex or concave, usually predictable, considering grain orientation. (see Wood warping) D[edit] Dado - a slot made across the grain. Typically, the slot is made by milling, chiseled, or sawed. Dovetail joint - a joint technique most commonly used in woodworking joinery. Noted for its resistance to being pulled apart (tensile strength), the dovetail joint is commonly used to join the sides of a drawer to the front. Drill - (verb) the process of making holes in a material or (noun) a tool for drilling holes. F[edit] Face - when a board has one side that is wider than the other, the wider side is referred to as the face (as opposed to the edge). May also refer to the face that is to be visible in the finished item. Fence - a flat and straight length of some material, usually wood, steel or aluminium, which provides a reference for tools to work against, or which prevents the work from sliding. Fiber/fibre - the fine tube-like structure of wood which is hollow and determines the grain direction. Figure - naturally occurring decorative patterns in wood, caused by either growth increments or tissue orientation. Firmer - a strong chisel for general work or mortising, may have square sides or bevels on both sides. Fishtail chisel or gouge - a chisel or gouge with a splayed end. Flat gouge - a gouge with minimal curvature, used for finishing and smoothing. Flitch - a board in which the round of the trunk is still visible, a rough-cut board. Flute - a deep channel cut in wood* occasionally denotes the cannel of a gouge. Foxing - a yellow-brown discoloration of wood due to fungal infection. French cleat - a molding used to hang cabinets Fret saw - a saw with a very fine toothed blade used for delicate cuts in thin material. Frosting - regular indented patterns created with a special-purpose punch called a froster. G[edit] Grain - the longitudinal fibers in wood. Gouge - a chisel-like tool with a curved cutting edge. Green wood - unseasoned wood; freshly harvested timber, usually with a high moisture content. Grit - the grade of particles in sandpaper or sharpening stones which determines the aggressiveness of the cut. Groove - a slot or channel made with the grain, usually on the end-grain in preparation for a tongue and groove joint. Grooving- a rectangular sinking in the surface of any material. H[edit] Hand plane - see Plane. Hardwood - wood from an angiosperm tree, i.e. a tree in the division Magnoliophyta. Despite the name, not necessarily very hard or dense wood (e.g. balsa is a hardwood), although generally harder than softwoods. Heart shake - a shake (i.e. crack or split) radiating out from the heartwood. Heel - the corner of a chisel, knife, or gouge bevel which meets the back of the blade and polishes the cut. Hold down or hold fast - a hold-down iron, fitting into a hole in a bench, tightened or loosened by hammer taps. Hollow grinding - a concave bevel on a chisel, gouge, or knife. I[edit] Incannel - the concave surface of a gouge; a gouge sharpened on the concave surface. Interlocked grain - wood grain which has multiple longitudinal directions in alternating layers, typical of many tropical hardwoods, and very difficult to work and to produce smooth surfaces. J[edit] Jig saw - a tool that can form circular cuts by moving the work piece past a blade rapidly moving up and down. Joiner - a woodworker who does finer work than a framing carpenter. Jointer - 1. a power plane used to straighten boards and square edges, sometimes called a joiner; 2. an intermediate length hand plane, a jointer plane. K[edit] Kerf - the gap left when material is removed by a saw. The width of the kerf is equal to the set of the saw. Knot - A circular pattern in timber, caused by a dead branch that was not fully integrated into the tree before it was cut down. A loose knot is one that cannot be relied upon to remain in place in the piece. A tight knot, on the other hand, is fixed by growth or position in the wood structure so that it firmly retains its place in the surrounding wood. L[edit] Lead - the tendency for wood that is being cut to direct the saw parallel to its grain. LathArt - a type of folk art that uses lath from old plaster and lath walls M[edit] Molding - a strip of material with various profiles used to cover transitions between surfaces or for decoration. Mortise or Mortice - a cavity or hole (generally rectangular) in a piece of wood, meant to receive a tenon or a hinge Mitre (UK, Cda) or Miter (US) - a joint made by fastening together pieces with the ends cut at an angle. Mitre box (UK, Cda) or Miter box (US) - a box used for making mitre joints by having slots to guide a saw at the desired angle for the joint. O[edit] Off fall - Scrap created by making a cut. Abbreviated as fall. Outcannel - the convex surface of a gouge; a gouge sharpened on the convex surface. P[edit] Plane (tool) - (verb) the process of removing material in thin shavings in order to make it flat, or (noun) a tool for planing. Plane iron - cutting part of a hand plane. Planer - or thicknesser. a machine which reduces the thickness of boards. Q[edit] Quarter-sawn - a plank with growth rings perpendicular to the wider face. (See Wood grain) R[edit] Rabbet - A 'groove' cut parallel to, and at the edge of, a board. Rail - Horizontal member of a frame on a door, window or panel. Rasp - a long and flat steel tool with raised teeth for shaping wood. Reed - a series of beads in a row. Relief cut - short straight cuts made at right angles to a curved layout so sharper than normal curves can be cut with a jig saw or band saw. Riffler - a paddle-shaped rasp. Rift sawn - rip sawing of lumber (timber) perpendicular to the grain, often confused with quarter sawn. Ring shake - a natural type of split (shake) occurring between the annual rings. Rip - a cut made parallel to the grain. Route - to cut a channel or groove. See router (woodworking). S[edit] S2S - lumber, usually furniture grade hardwood, with two sides planed. (S4S - four sides) Saw rasp - a rasp with saw teeth. Scorp - a drawknife with a curved, sometimes completely circular blade, often used for hollowing out objects such as bowls. Scratch awl - a sharp-pointed hand tool used to mark wood for cutting, usually used in joinery or when a more precise mark is need beyond that provided by a pencil or other method of marking out the cut. Scribe - the woodworking technique of shaping the end of a moulding or frame component to neatly fit the contours of an abutting member. Scroll saw - a motorized fretsaw. Seasoning - reducing the moisture content of wood before working to prevent cracking, splitting, and other damage due to drying. Shake - 1. a crack or split in wood, caused by damage or drying; 2. a split (as opposed to sawn) shingle. Shoot - planing an edge straight or square. See Shooting board. Slab - 1. a partially round cut from a log; 2. In Australian English a slab is a plank. Slab-cut - a plank with growth rings roughly parallel to the wider face. Slick - a giant chisel used in framing and traditional building construction. Slip - a shaped stone used for sharpening non-flat blades such as gouges. Snib - a wooden toggle used to hold the work on a table. Softwood - wood from a gymnosperm tree, i.e. trees in the divisions Pinophyta and Ginkgophyta Despite the name, not necessarily very soft or light wood (e.g. douglas-fir is a softwood). Spalting - a change in the texture, strength and color of wood caused by colonies of fungus growing within the dead wood. Where colonies of fungus meet, fine black lines - often considered a desirable feature, can be seen. Split - to longitudinally separate wood along grain layers. Spokeshave - a tool used to shape and smooth wooden rods and shafts - often for use as wheel spokes and chair legs. Square - 1. a tool such as a steel square, try square, combination square; 2. a right angle; 3. an area of 100 sq. ft. Stickers - a small block of wood used to separate boards that are in the process of drying. Sticking - a moulding that is part of a larger piece of wood such as a frame (as opposed to being applied). Stile (or sometimes style) - vertical member of a frame on a door, window or panel. Stringer - in stairs, a is a timber (usually 2"x12") that supports the treads and rises in a staircase. Sweep - 1. the curvature of a gouge, ranging from flat (little curvature, but not actually flat else it would be a chisel) to deep or quick; a warping defect in a piece of wood. T[edit] Tear out - broken or torn fibres resulting from damage as the blade of a tool exits the cut. Tenon - is a projection on the end of a piece of wood for insertion into a mortise. Tread - in stairs the part that is stepped on. True - something which is accurately placed, shaped, or sized. To true up two pieces of wood is to make them align. The correct size or shape. Twist - longitudinal twisting of wood due to uneven seasoning or grain. (See Wood warping) U[edit] Undercutting - cutting away from an edge to increase the sense of relief or thinness. V[edit] Veiner - a small deep gouge. Veneer (wood) - very thin slices of wood used for inlay or to cover surfaces. Veneer saw - specialty tool for trimming veneer. W[edit] Wane - an edge of a sawn board where the bark or surface of the trunk remains. Warp - distorted lumber, such as a twist, cup or a bow. (See Wood warping) Wasting - quickly removing wood during carving, usually with an adze, knife, or rasp. Waste - wood that will be removed in the finished work, often retained during working as a handle. Wood - an organic material, a natural composite of cellulose fibers (which are strong in tension) embedded in a matrix of lignin which resists compression. External links[edit] Woodworking glossary [hide] v t e Woodworking Overviews History Glossary Wood (lumber) Wood art Forms Boat building Bow and arrow Bush carpentry Cabinetry Caning Carpentry Chainsaw carving Chip carving Clogs Ébéniste Fretwork Intarsia Japanese carpentry Log building Marquetry Millwork Parquetry Pyrography Relief carving Root carving Sawdust Segmented turning Shingle weaving Shipbuilding Spindle turning Timber framing Whittling Wood carving Woodturning Wood flour Woods Soft Cedar (Calocedrus, Cedrus) Cypress Douglas fir Fir Juniper Larch Pine Spruce Yew Hard Ash Alder Aspen Balsa Beech Birch Cherry Chestnut Cocobolo Ebony Elm Hazel Lignum vitae Linden (lime, basswood) Mahogany Maple Oak Padauk Plum Poplar Teak Totara Walnut Willow Tools Abrasives Axe Adze Chisel Clamp Drawknife Drill Float Mallet Milling machine Mitre box Moulding plane Plane Rasp Router Sandpaper Spokeshave Timber-framing Vise Winding sticks Wood scribe Workbench Saws Backsaw Bandsaw Bow Bucksaw Chainsaw Circular Compass Coping Crosscut Frame Fretsaw Jigsaw Keyhole Miter Rip Scroll Veneer Whipsaw Geometry Joints Birdsmouth Bridle Butt Butterfly Coping Crown of thorns Dados Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's mitre Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove Profiles Bead Bevel Chamfer Molding Ogee Ogive Treatments French polish Heat bending Paint Paint stripper Steam bending Thermal Varnish Wood drying Wood preservation Wood stain Organizations American Association of Woodturners Architectural Woodwork Institute British Woodworking Federation Building and Wood Workers' International Caricature Carvers of America International Federation of Building and Wood Workers National Wood Carvers Association Society of Wood Engravers Timber Framers Guild Conversion Chainsaw mill Hewing Sawmill Whipsaw Wood splitting Techniques Frame and panel Frameless construction Category Category WikiProject WikiProject Commons page Commons Categories: Glossaries of crafts Woodworking Art terminology bottle stopper stoppers cutting boards handmade charlotte nc north carolina custom live edge live-edge
Keywords	N/A

Server Information

WebSite	www.goodwoodbytopher.com
Host IP	198.185.159.144
Location	New York, New York, United States

Related Websites

                    Site
                    Rank
                

More to Explore

grousebustergundogs.com

gsgibridge.com

gshoman.com

hammerandhandcompany.com

harborsidegroup.com

gskcmg1.cloudapp.net

habanaheights.com

Goodwoodbytopher.com Valuation

US$24,003

Last updated: Sep 4, 2021

Goodwoodbytopher.com has global traffic rank of 3,536,081. Goodwoodbytopher.com has an estimated worth of US$ 24,003, based on its estimated Ads revenue. Goodwoodbytopher.com receives approximately 876 unique visitors each day. Its web server is located in New York, New York, United States, with IP address 198.185.159.144. According to SiteAdvisor, goodwoodbytopher.com is safe to visit.

Traffic & Worth Estimates

Purchase/Sale Value	US$24,003
Daily Ads Revenue	US$13
Monthly Ads Revenue	US$394
Yearly Ads Revenue	US$4,800
Daily Unique Visitors	876
Note: All traffic and earnings values are estimates.

Traffic Ranks

Global Rank	3,536,081
Delta (90 Days)	0
Most Popular In Country	N/A
Country Rank	N/A

DNS Records

Host	Type	TTL	Data
goodwoodbytopher.com	A	600	IP: 198.185.159.144
goodwoodbytopher.com	A	600	IP: 198.185.159.145
goodwoodbytopher.com	A	600	IP: 198.49.23.144
goodwoodbytopher.com	A	600	IP: 198.49.23.145
goodwoodbytopher.com	MX	3600	Priority: 0 Target: smtp.secureserver.net.
goodwoodbytopher.com	MX	3600	Priority: 10 Target: mailstore1.secureserver.net.
goodwoodbytopher.com	NS	3600	Target: ns44.domaincontrol.com.
goodwoodbytopher.com	NS	3600	Target: ns43.domaincontrol.com.
goodwoodbytopher.com	TXT	3600	TXT: google-site-verification=PoQYtId-p6DwVwd8FagCVzt3qi18Clhy5KuMo53D1XA
goodwoodbytopher.com	SOA	3600	MNAME: ns43.domaincontrol.com. RNAME: dns.jomax.net. Serial: 2016072500 Refresh: 28800 Retry: 7200 Expire: 604800 Minimum TTL: 600

HTTP Headers

HTTP/1.1 200 OK
Accept-Ranges: bytes
Age: 5760
Content-Type: text/html;charset=utf-8
Date: Sat, 04 Sep 2021 14:04:09 GMT
Etag: W/"1957f5a9647a609327db755bafc0dd87--gzip"
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Server: Squarespace
Set-Cookie: crumb=BVBTQxLn6QfJZjdlOWEwYzA5YWJlZjQ5MTQxZTVmOTdjZjY2ZWE2;Path=/
Vary: Accept-Encoding
X-Content-Type-Options: nosniff
X-Contextid: CKnCt8VI/znzs5Jk2
Transfer-Encoding: chunked

Goodwoodbytopher.com Whois Information

   Domain Name: GOODWOODBYTOPHER.COM
   Registry Domain ID: 1986716483_DOMAIN_COM-VRSN
   Registrar WHOIS Server: whois.godaddy.com
   Registrar URL: http://www.godaddy.com
   Updated Date: 2017-10-08T00:40:22Z
   Creation Date: 2015-12-11T00:22:15Z
   Registry Expiry Date: 2021-12-11T00:22:15Z
   Registrar: GoDaddy.com, LLC
   Registrar IANA ID: 146
   Registrar Abuse Contact Email: abuse@godaddy.com
   Registrar Abuse Contact Phone: 480-624-2505
   Domain Status: clientDeleteProhibited https://icann.org/epp#clientDeleteProhibited
   Domain Status: clientRenewProhibited https://icann.org/epp#clientRenewProhibited
   Domain Status: clientTransferProhibited https://icann.org/epp#clientTransferProhibited
   Domain Status: clientUpdateProhibited https://icann.org/epp#clientUpdateProhibited
   Name Server: NS43.DOMAINCONTROL.COM
   Name Server: NS44.DOMAINCONTROL.COM
   DNSSEC: unsigned
   URL of the ICANN Whois Inaccuracy Complaint Form: https://www.icann.org/wicf/

Domain Name: goodwoodbytopher.com
Registry Domain ID: 1986716483_DOMAIN_COM-VRSN
Registrar WHOIS Server: whois.godaddy.com
Registrar URL: http://www.godaddy.com
Updated Date: 2017-10-07T17:40:23Z
Creation Date: 2015-12-10T19:22:15Z
Registrar Registration Expiration Date: 2021-12-10T19:22:15Z
Registrar: GoDaddy.com, LLC
Registrar IANA ID: 146
Registrar Abuse Contact Email: abuse@godaddy.com
Registrar Abuse Contact Phone: +1.4806242505
Domain Status: clientTransferProhibited http://www.icann.org/epp#clientTransferProhibited
Domain Status: clientUpdateProhibited http://www.icann.org/epp#clientUpdateProhibited
Domain Status: clientRenewProhibited http://www.icann.org/epp#clientRenewProhibited
Domain Status: clientDeleteProhibited http://www.icann.org/epp#clientDeleteProhibited
Registrant Organization:
Registrant State/Province: North Carolina
Registrant Country: US
Registrant Email: Select Contact Domain Holder link at https://www.godaddy.com/whois/results.aspx?domain=goodwoodbytopher.com
Tech Email: Select Contact Domain Holder link at https://www.godaddy.com/whois/results.aspx?domain=goodwoodbytopher.com
Admin Email: Select Contact Domain Holder link at https://www.godaddy.com/whois/results.aspx?domain=goodwoodbytopher.com
Name Server: NS43.DOMAINCONTROL.COM
Name Server: NS44.DOMAINCONTROL.COM
DNSSEC: unsigned
URL of the ICANN WHOIS Data Problem Reporting System: http://wdprs.internic.net/

-status-codes-2014-06-16-en

without notice.

Goodwoodbytopher.com valuation and analysis